Tripp Lite SU2200RTXL2UA 2200VA/1600W SmartOnline 2U Rack/Tower Double-Conversion UPS System, w/ USB interface

*Image may not reflect most recent product revision

Price Alert

Part#: UPS-SU22RT
Package: RETAIL
Manufacturer: Tripp Lite
Manufacturer Part#: SU2200RTXL2UA
Shipping Weight: 60.10 lbs.(27.32 kg)

Price:

$879.59

(Wait, what?)

Product Info

Reviews

Warranty

Product Info:

Specifications

Mfr Part Number: SU2200RTXL2UA
Voltage compatibility: 110V; 120V AC
Frequency compatibility: 50/60 Hz
Output:

Output volt amp capacity: 2200 VA
Output watt capacity: 1600 watts
Output power factor: 0.7
Crest Factor: 3:1
Output nominal voltage: 120V AC
Output voltage regulation:

Output voltage regulation(line mode): +/- 2%
Output voltage regulation (Economy line mode): +/- 10%
Output voltage regulation(Battery-mode): +/- 2%

Built-in UPS output receptacles: 6x NEMA 5-15/20R, 1x NEMA L5-20R
Built-in controllable switched load banks: 2x switchable three-outlet 5-15R load banks
Output AC waveform: AC mode - Sine wave; Battery mode - Pure Sine wave

Input:

Rated input current (at maximum load): 16A
Norminal Input Voltage Supported: 110V AC; 120V AC
UPS Input connection type: 5-20P
Input circuit breaker: 30A
UPS input cord length: 10 ft/ 3 m
Recommended Electrical Service: 20A 120V

Battery:

Full load runtime: 4.5 min. (1600 W)
Half load runtime: 14 min. (800W)
Expandable battery runtime: Supports extended runtime via optional external battery packs
DC system voltage: 48V DC
Battery recharge rate: Less than 6 hours from10% to 80%
Battery Access: Front panel battery access door
Battery replacement description: Hot-swappable, user replaceable sealed, flame retardant, non-spillable batteries

Surge / Noise Suppression:

AC suppression joule rating: 570
AC suppression response time: Instantaneous
UPS Dataline suppression 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
EMI / RFI AC noise suppression: Yes

Communications:

Communications interface: USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port description: Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications
PowerAlert software: Included
Communications cable: USB and DB9 cabling included
WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications

Line / Battery Transfer:

Transfer time: No transfer time (0 ms.) in online, double-conversion mode
Low voltage transfer to battery power (setpoint): 80V (100% load), 65V ( <70% load)
High voltage transfer to battery power (setpoint): 150

Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
Material of construction: Steel
Form factors supported: Rackmount (2U)
Secondary form factor: Tower (requires 2-9USTAND)
Cooling method: Fan
Dimensions (WxDxH): 17.5 x 19.0 x 3.5 inch / 44.4 x 48.3 x 8.9 cm
Weight: 47.4 lbs / 21.5 kg

* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.