Specifications

• Mfr Part Number: SMART3000RM2U
• Voltage compatibility: 120 V AC
• Frequency compatibility: 60 Hz
• Output:
  • Output volt amp capacity: 3000 VA
  • Output watt capacity: 2250 watts
  • Output nominal voltage: 120 V AC
  • Output voltage regulation: Line mode - Sine wave line voltage 120V (-18% / +8%); Battery mode - Sine wave output 120V +/-5%
  • Output frequency regulation: Line mode - Passes line frequency of 60Hz +/-10%; Battery mode - Inverter output regulated to 60Hz +/-0.5Hz
  • Outlet quantity / type: 4x NEMA 5-15R; 4x NEMA 5-20R; 1x NEMA L5-30R
  • Overload protection: Resettable circuit breaker
• Input:
  • Maximum input amps: 24 A
  • Input connection type: NEMA L5-30P
  • Input cord length: 10 ft., 10 gauge
  • Recommended electrical service: 30A 120V
• Battery:
  • Full load runtime: 4 minutes (3000 VA)
  • Half load runtime: 13 minutes (1500VA)
  • Expandable battery runtime: Supports extended runtime with optional external battery packs BP48V242U (limit 1) and BP48V60RT3U (multi-pack compatible)
  • DC system voltage: 48 V DC
  • Typical battery lifespan: 3~6 years, depending on usage
  • Battery recharge rate: 2~4 hours to 90%
• Voltage Regulation:
  • Overvoltage correction: Input voltages between 128 and 147V AC are reduced by 12%
  • Direct pass through: Input voltages between 105 and 127V AC are passed on to connected equipment unchanged
  • Brownout correction: Input voltages between 95 and 104V AC are boosted by 12%
  • Severe brownout correction: Input voltages between 79 and 94V AC are boosted by 24%
• Surge / Noise Suppression:
  • AC surge suppression: 480 joules
  • AC suppression response time: Instantaneous
  • EMI / RFI AC noise suppression: Yes
• Communications:
  • Network monitoring port: 4x built-in monitoring ports, 2x USB, 2x DB9
  • SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
  • WatchDog compatibility: Yes
• Line / Battery Transfer:
  • Transfer time from line power to battery mode: 2~4 milliseconds
  • Low voltage transfer to battery power: 79V (resets to line power as voltage increases to 83V)
  • High voltage transfer to battery power: 147V (resets to line power as voltage decreases to 144V)
• Certifications: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico)
• Special Features:
  • EPO port: Includes RJ11 EPO (emergency power off) port and interconnection cable
  • TVSS grounding: Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories requiring a safe grounding point
  • Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
  • Appearance: Attractive gray rackmount housing, optional use 2U black front bezel included to enable black color appearance
• Physical:
  • Material of construction: Steel
  • Form factors supported: Rack/Tower (2U)
  • Cooling method: Built-in cooling fan
  • Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off
  • Dimensions (WxDxH): 17.5 x 19 x 3.5 inch / 44.5 x 48.3 x 8.89 cm
  • Weight: 64 lbs / 29.1 kg