Product Info: |
Specifications- Mfr Part Number: E10M20-T1
- General
- Host Bus Interface: PCIe 3.0 x8
- Bracket Height: Low Profile and Full Height
- Size (Height x Width x Depth): 71.75 mm x 200.05 mm x 17.70 mm
- Operating Temperature: 0°C to 40°C (32°F to 104°F)
- Storage Temperature: -20°C to 60°C (-5°F to 140°F)
- Relative Humidity: 5% to 95% RH
- Warranty: 5 Years
- Notes: The warranty period starts from the purchase date as stated on your purchase receipt.
- Storage
- Storage Interface: PCIe NVMe
- Supported Form Factor: 22110 / 2280
- Connector Type and Quantity: M-key, 2 Slots
- Network
- IEEE Specification Compliance:
- IEEE 802.3an 10Gbps Ethernet
- IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3u Fast Ethernet
- IEEE 802.3x Flow Control
- Data Transfer Rates: 10 Gbps
- Network Operation Mode: Full Duplex
- Supported Features:
- 9 KB Jumbo Frame
- TCP/UDP/IP Checksum Offloading
- Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
- Notes: DSM version requirement: 6.2.3-25426 or later version
- Compatibility
- Applied Models: NVMe SSD
- SA series: SA3600, SA3400
- 20 series: RS820RP+, RS820+
- 19 series: DS2419+, DS1819+
- 18 series: RS2818RP+, DS3018xs, DS1618+
- Notes: The listed models support Ethernet function when used with E10M20-T1.
** This item is eligible for replacement only and is NON REFUNDABLE!! **
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description. |
| |
Operation Change Notification
