Product Info: |
Specifications- Mfr Part Number: ATX-450PN-B204
- Features:
- Complied with ATX12V standard
- High efficiency and reliability, low noise and ripple
- Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
- Remote ON/OFF function
- Internal 12V DC fan included
- Noise Killer (thermal fan speed control function)
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report)
- Total Power: 450 W
- Type: ATX from factor 12V v2.2
- Input:
- Input Range: ±10% of 115Vrms/57~63Hz or 230Vrms/47~53Hz, Manual Selection
- Input Current: 10A (RMS) @115Vac, 5A (RMS) @ 230Vac
- Inrush Current: No Damage
- Output:
- +3.3V @ 22A; +5V @ 15A; +12V1 & +12V2 @ 18A; -12V @ 0.3A; +5VSB @ 2.5A
- +3.3V & +5V total output not exceed 145W
- +12V1 & +12V2 total output not exceed 360W
- +3.3V & +5V & +12V1 & +12V2 total output not exceed 433W
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency: 70% minimum measured at normal AC mains voltage and frequency with full load
- Rise time: Less than 20ms
- Hold-up Time: 12ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 115VAC/60Hz
- MTBF: 100,000 hours
- Connectors: 1x 20+4pin Main Connector; 1x 4pin 12V CPU Connector; 1x PCI-Express Connectors; 2x SATA Connectors; 6x Peripheral Connectors; 1x Floppy Connector
- Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150.0 x 140.0 x 86.0 mm
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description. |
| |
Operation Change Notification
