Product Info: |
Specifications- Mfr Part Number: FSP700PSASK-B204
- Features:
- Complied with ATX12V standard
- Active Power Factor Correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2011/65/EU & (EU)2015/863 (Restriction on Hazardous Substances)
- Remote ON/OFF function
- Internal 12V DC fan included
- Noise Killer
- AC input I/O switch is option
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved by CB 62368 & 60950-1 2nd, EMC, CUL/UL TUV, FCC
- Input:
- Input Range: 90 ~ 264Vac (RMS), Full Range Input
- Frequency: 47 ~ 63Hz
- Input Current: Max 10A(RMS) @ 115Vac, 5A(RMS) @ 230Vac
- Inrush Current: No damage at cold start
- Output:
- Total Watts: 700W
- Output Voltage: +3.3V @ 24A, +5V @ 30A, +12V1 @ 16A, +12V2 @ 16A, +12V3 @ 16A, +12V4 @ 16A, -12V @ 0.5A, +5VSB @ 4.0A
- +3.3V and +5V total output not exceed 170W
- Dielectric Withstand: Primary frame ground 1800V AC for 2 second
- Efficiency: Typical > 85%
- Rise Time: Less than 20ms
- Hold-up Time: 16ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac, 63Hz
- MTBF: A minimum predicted MTBF (MIL-HDBK-217) of 100,000 hours of continuous operation at +25°C
- Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150.0 x 140.0 x 86.0 mm
- RoHS Compliant
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description. |
| |
Operation Change Notification
