*Image may not reflect most recent product revision
0.40 lbs.(0.18 kg)
Free shipping valid for the lower 48 contiguous United States.
Out of Stock ( Wait, what?)
Specifications Mfr Part Number: I350T2V2 Ethernet Features: IEEE 802.3 auto-negotiation 1Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY specifications Compliant Integrated PHY for 10/100/1000 Mb/s for multispeed, full and half-duplex IEEE 802.3x and 802.3z compliant flow control support with software-controllable Rx thresholds and Tx pause frames Automatic cross-over detection function (MDI/MDI-X) IEEE 1588 protocol and 802.1AS implementation Power Management and Efficiency: <1W S0-Max (state) 1000BASE-T Active 90oC (mode), <400mW S0-Typ (state) 100BASE-T Active (mode) IEEE802.3az - Energy Efficient Ethernet (EEE) DMA Coalescing Smart Power Down (SPD) at S0 no link / Sx no link Active State Power Management (ASPM) Support LAN disable function Full wake up support Advanced Power Management (APM) Support (formerly Wake on LAN) Advanced Configuration and Power Interface (ACPI) specification v2.0c Magic Packet wake-up enable with unique MAC address ACPI register set and power down functionality supporting D0 and D3 states MAC Power Management controls Low Power Link Up - Link Speed Control Power Management Protocol Offload (Proxying) Latency Tolerance Reporting (LTR) I/O Virtualization Features: Eight transmit (Tx) and receive (Rx) queue pairs per port Flexible Port Partitioning - 32 Virtual Functions on Quad-port or 16 Virtual Functions on Dual-port Support for PCI-SIG SR-IOV specification Rx/Tx Round-Robin Scheduling Traffic Isolation Traffic Steering VM to VM Packet forwarding (Packet Loopback) MAC and VLAN anti-spoofing Malicious driver detection Storm control Per-pool statistics, offloads, and jumbo frames support Independent Function Level Reset (FLR) for Physical and Virtual Functions IEEE 802.1q Virtual Local Area Network (VLAN) support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags IEEE 802.1q advanced packet filtering Mirroring rules Support for Simple VEPA VF Promiscuous modes Stateless Offloads/Performance Features: TCP/UDP, IPv4 checksum offloads (Rx/ Tx/Large-send); Extended Tx descriptors for more offload capabilities IPv6 support for IP/TCP and IP/UDP receive checksum offload Tx TCP segmentation offload (IPv4, IPv6) Transmit Segmentation Offloading (TSO) Interrupt throttling control Legacy and Message Signal Interrupt (MSI) Modes Message Signal Interrupt Extension (MSI-X) Intelligent interrupt generation Receive Side Scaling (RSS) for Windows environment Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP) Support for packets up to 9.5K Bytes (Jumbo Frames) Low Latency Interrupts Header/packet data split in receive PCIe v2.1 TLP Processing Hint Requester Descriptor ring management hardware for Transmit and Receive Remote Boot Option Features: Preboot eXecution Environment (PXE) flash interface support Intel Ethernet iSCSI Remote Boot for Windows, Linux, and VMware Intel Boot Agent software - Linux boot via PXE or BOOTP, Windows Deployment Services, or UEFI Manageability Features: Management Component Transport Protocol (MCTP) Firmware Based Thermal Management IEEE 802.3 MII Management Interface MAC/PHY Control and Status Watchdog timer Extended error reporting Controller Memory Protection Adapter Product Features: Plug and play specification support Intel I/O Acceleration Technology (Intel I/OAT) Ships with full-height bracket installed; low-profile bracket included in package Cable distance Standards: IEEE 802.3/10BASE-T, 100BASE-TX, 1000BASE-T Controller Processor: Intel Ethernet Controller I350 Connectors: RJ45 (Copper) Data Rate: Per port 10/100/1000 Mbps Cable Medium: Copper Cabling Type: Cat 5 up to 100m Bracket Height: Low Profile and Full Height Bus Type: PCI-Express 2.1 (5.0 GT/s) Bus Width: PCI-Express x4; operable in x4, x8 and x16 slots Interrupt Levels: INTA, INTB, INTC, INTD, MSI, MSI-X Power Consumption: 4.4W Typical Certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, KCC Dimensions (WxLxH): Full-height End Bracket: 2.710 x 5.330 x 4.725 inch / 6.89 x 13.54 x 12.00 cm Low-profile End Bracket: 2.710 x 5.330 x 3.117 inch / 6.89 x 13.54 x 7.92 cm ** This item is eligible for replacement only and is NON REFUNDABLE!! **
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.