Full compatibility with all types of fans using voltage control
With a maximum of 10 Watts per channel, the Sentry 2 will support almost all high end fans
Tuned accuracy with only a tolerance of one degree
Sound alarm to alert when the temperature is over
Stored settings, the Sentry keeps your settings even after power off
Fan Channel: 5
Max Watt per Channel: 10W
Temperature Module Channel: 5
Measurement Frequency: Every 2 Seconds
Temperature Alarm Range: 30°C to 90°C
Auto: Min 40%, Under 0-25°C, Fan RPM 40%
Manual: Min 40%
Screen Size: 4.63 inch
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.
This is a great buy. Easy to install and works perfectly. The cost is the lowest for this model and for any touch screen like it.
A lot of wires but its worth installing.
I would suggest you place all the temperature probes where air flows and in the coil if you have one, also place one in your Ram. The back side of the motherboard if you can access it is the best for the probe on the CPU.
Reviewed by conan 911 from vineland, NJ on 02/26/14
works good, lowered fan speeds, temps still good. its easy to use an for the price you can't beat it. would buy another.
I've been ordering large and small orders, business and personal from Ewiz (now Superbiiz) since 2005. The prices have always been great, usually lower or on par with almost any other supplier, with ... (more)