Product Info: |
Specifications- Mfr Part Number: TS-431XEU-2G-US
- Hardware:
- CPU: Alpine AL-314 Processor (1.7GHz, Quad-core)
- Hardware Encryption Accleration
- System Memory: 1x 2GB SODIMM DDR3-1600
- Flash Memory: 512MB
- Hard Drive: 4x 3.5"/2.5" SATA 6Gb/s HDDs/ SSDs
- LAN Port: 1x 10 Gigabit SFP+ LAN Ports, 2x Gigabit RJ45 LAN Ports
- USB: 4x USB 3.0 Ports
- LED: HDD1, HDD2, HDD3, HDD4, LAN1, LAN2, 10GbE, STATUS
- Button: Power, Reset
- System Warning: Buzzer
- Noise Level: Sound Level - 20.3 dB(A)
- Operating System: QTS 4.3 (embedded Linux)
- Networking:
- TCP/IP (IPv4 & IPv6: Dual Stack)
- Jumbo frame (failover, multi-IP settings, port trunking, and NIC teaming)
- Service binding based on network interfaces
- Squid web caching proxy
- Proxy client
- DHCP server and client
- Protocols: CIFS/SMB, AFP v3.3, NFS v3, FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, and SMSC
- UPnP & Bonjour Discovery
- USB Wi-Fi Adapter Support
- Security:
- Network access protection with auto-blocking: SSH, Telnet, HTTP(S), FTP, CIFS/SMB, AFP
- CIFS host access control for shared folders
- FIPS 140-2 validated AES 256-bit volume-based and shared folder data encryption
- AES 256-bit external drive encryption
- Importing of SSL certificates from Let’s Encrypt
- Instant alerts through email, SMS, push service
- 2-step verification
- Storage Management:
- Storage space utilization monitoring
- Flexible volumes and LUNs with thin provisioning and space reclaiming
- Disk volume types
- RAID 0,1, 5, 6, 10, JBOD, single
- RAID hot spare and global hot spare
- Storage pools
- Supports snapshots
- Supports Volume/LUN snapshot
- Snapshot manager
- Snapshot clone
- Snapshot vault
- Snapshot replica
- Snapshot agent for Microsoft Windows and VMware vSphere
- Online volume expansion
- Online storage pool expansion
- Online RAID capacity expansion and online RAID level migration
- SMART data migration
- Storage expansion through QNAP expansion units (UX-500P and UX-800P)
- JBOD enclosure roaming
- SSD read-only or read-write cache
- Bad block scan and hard drive S.M.A.R.T.
- Bad block recovery and RAID recovery
- Bitmap support
- File System:
- Internal HDD: EXT4
- External HDD: EXT3, EXT4, NTFS, FAT32, HFS+, and exFAT
- Form Factor: 1U
- Fan: 3x 4cm System Fan (12V DC)
- Power Supply: 100W, 100-240V AC, 50-60Hz, open frame
- Power Consumption:
- HDD Standby: 12.42W
- In Operation: 30.99W (with 4x 2TB HDD installed)
- Dimensions (WxDxH): 439.0 x 291.0 x 44.0 mm
- Weight: 4.15 kg
** This item is eligible for replacement only and is NON REFUNDABLE!! **
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description. |
| |
Operation Change Notification
