* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.
Does whats expected. Not much else to say about it.
could be smaller I guess.
Probably would work great with y adapter if you want to use with 2 fans.
Reviewed by frrrosty from West Islip, NY on 05/08/10
Excellent controller and a great bargain. Simple, straight line wiring, with nice long leads.
I have placed this controller inside the left side panel near the panel fan, needing only one connection to the main chassis. However, I could have just as easily mounted the controlled on the back, with the panel fan still requiring just one connection to the main chassis.
The wires that comes with the controller are very long. It's long enough that you will be able to mount the controller just (continued...)
I wish the control knob were slightly longer so it would protrude more through mesh.
The double-sided foam tape included, about 1/8 inch thick, makes that mesh issue even worse, so use REGULAR double-sided tape (Not foam tape) to mount through mesh or a hole.
The double-sided thermal tape included in most RAM heat spreader kits is about the stickiest substance on earth and works great for this, and you just might have some lying around.
It works Reviewed by Duc from Saint-Laurent, PQ on 11/17/06
Basically, this is a small fan controller that has a small turning knob and two 3 pin connectors. One connector is plugged into a fan header on the motherboard and the other into the fan. Turning the knob will slow or increase the fan's spinning speed by increased it's wattage. The controller can be installed anywhere on or in your case thanks to the double sided tape behind the fan controller. Notice that your motherboard might have conflicts with this controller because the controller might (continued...)
I ordered this Blu Ray drive yesterday around noon and checked the tracking today and it was out for delivery. I believe it was less than 24 hours from the time I ordered until it got here, and the sh... (more)