Tripplelite SMART1500RMXL2UA 1500VA/1000W SmartPro 2U Rack/Tower Line-Interactive UPS System, w/ USB interface

Specifications
• Mfr Part Number: SMART1500RMXL2UA
• Voltage compatibility: 120V AC
• Frequency compatibility: 60 Hz
• Output:
• Output volt amp capacity: 1500 VA
• Output watt capacity: 1000 watts
• Output power factor: 0.7
• Output nominal voltage: 120V AC
• Output voltage regulation:
• Output voltage regulation(line mode): -18%, +8%
• Output voltage regulation(Battery-mode): +/- 5%
• Built-in UPS output receptacles: 8x NEMA 5-15R outlet(s)
• Built-in controllable switched load banks: 3x switchable two-outlet 5-15R load banks
• Output AC waveform (AC mode): Sine wave
• Output AC waveform (battery mode): Pure Sine wave
• Input:
• Rated input current (at maximum load): 10.1A
• Nominal Input Voltage(s) Supported: 120V AC
• UPS input connection type: 5-15P
• Input circuit breaker: 15A
• UPS Input cord length: 10 ft/ 3 m
• Recommended Electrical Service: 15A 120V
• Battery:
• Full load runtime: 7.5 min(1000W)
• Half load runtime: 21 min(500W)
• Expandable battery runtime: Extended runtime supported via optional external battery packs
• External battery pack compatibility: BP36V15-2U (limit 1); BP36V42-3U (multi-pack compatible)
• DC system voltage: 36V DC
• Battery recharge rate: Less than 4.5 hours from 10% to 90% (included battery)
• Replacement battery cartridge (internal UPS battery replacement): RBC93-2U
• Battery Access: Front panel battery access door
• Battery replacement description: Hot-swappable, user replaceable batteries
• Surge / Noise Suppression:
• UPS AC suppression joule rating: 480
• UPS AC suppression response time: Instantaneous
• EMI / RFI AC noise suppression: Yes
• Communications:
• Communications interface: USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
• Network monitoring port: Supports detailed monitoring of UPS and site power conditions
• PowerAlert software: Included
• Communications cable: USB and DB9 cabling included
• WatchDog compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Line / Battery Transfer:
• Transfer time: 2~4 milliseconds
• Low voltage transfer to battery power (setpoint): 75
• High voltage transfer to battery power (setpoint): 147
• Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
• Material of construction: Steel
• Form factors supported: Rackmount (2U)
• Cooling method: Fan
• Secondary form factor: Tower (requires 2-9USTAND)
• Dimensions (WxDxH): 17.5 x 13.5 x 3.5 inch / 44.4 x 34.3 x 8.9 cm
• Weight: 43.5 lbs / 19.7 kg

* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.