Tripp Lite SMART1000RM2U SmartPro 1000VA/700W 2U Rack/Tower Line Interactive Sine Wave UPS System

Specifications

• Mfr Part Number: SMART1000RM2U
• Output:
  • Output Volt Amp Capacity: 1000VA
  • Output kVA Capacity: 1kVA
  • Output Watt Capacity: 700W
  • Output Power Factor: 0.7
  • Nominal Output Voltage Supported: 120V
  • Frequency Compatibility: 60Hz
  • Output Voltage Regulation (Line mode): -21%, +8%
  • Output Voltage Regulation (Battery mode): +/- 5%
  • Built-in UPS Output Receptacles: 6x 5-15R outlets
  • Built-in Controllable Switched Load Banks: Two switchable two-outlet 5-15R load banks
  • Output AC Waveform (AC mode): Sine wave
  • Output AC Waveform (Battery mode): Pure Sine wave
• Input:
  • Rated Input Current (Max): 6.8A
  • Nominal Input Voltage Supported: 120V AC
  • UPS Input Connection Type: 5-15P
  • Input Circuit Breaker: 15A
  • UPS Input Cord Length: 10ft / 3m
  • Recommended Electrical Service: 15A 120V
• Battery:
  • Full Road Runtime: 7 min. (700W)
  • Half Load Runtime: 17 min. (350W)
  • DC System Voltage: 24VDC
  • Battery Recharge Rate (included batteries): Less than 4 hours from 10% to 90%
  • Replacement Battery Cartridge (internal UPS battery replacement): RBC92-2U
  • Battery Access: Front panel battery access door
  • Battery Replacement Description: Hot-swappable, user replaceable batteries
• Voltage Regulation:
  • Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147
  • Overvoltage Correction: Input voltages between 128 and 147 are reduced by 12%
  • Undervoltage Correction: Input voltages between 83 and 107 are boosted by 14%
• Leds Alarms&Switches:
  • LED Indicators: 5x LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
  • Alarms: Audible alarm indicates power-failure, overload and low-battery conditions
  • Alarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
  • Switches: 2x Switches control off/on power status and alarm-cancel/self-test operation
• Surge/Noise Suppression:
  • UPS AC Suppression Joule Rating: 570
  • UPS AC Suppression Response Time: Instantaneous
  • EMI/RFI AC Noise Suppression: Yes
• Communications:
  • Communications Interface: USB; DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
  • Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditions
  • PowerAlert Software: Included
  • Communications Cable: USB and DB9 cabling included
  • WatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applications
• Line/Battery Transfer:
  • Transfer Time: 2-4 milliseconds
  • Low Voltage Transfer to Battery Power (setpoint): 83
  • High Voltage Transfer to Battery Power (setpoint): 147
• Special Features:
  • Grounding Lug: Back panel grounding lug
  • Cold Start (startup in battery mode during a power failure): Cold-start operation supported
  • High Availability UPS Features: Hot swappable batteries
  • Green & High Efficiency Features: Individually controllable load banks
• Material: Steel
• Cooling Method: Fan
• AC Mode BTU (Full Load): 151.9 hours
• Battery Mode BTU (Full Load): 207 hours
• Certifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI)
• Form Factor: Rackmount / Tower (requires 2-9USTAND)
• Demensions (WxDxH): 17.5 x 13.5 x 3.5 inch / 44.4 x 34.3 x 8.9 cm
• Weight: 35.0 Ibs / 15.9 kg