Sparkle SPI500ACH8-B204 500W ATX12V 80 Plus Switching Power Supply w/ Active PFC

Specifications
• Mfr Part Number: SPI500ACH8-B204
• Features:
• Complied with ATX12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
• Remote ON/OFF function
• Internal 12V DC fan included
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
• Approved CUL/UL60950-1, CSA, TUV EN60950-1, CB report(60950-1), NEMKO, FCC, EMC
• Total Power: 500 W
• Input:
• Input Range: 90~265 Vac (RMS), Full Range Input
• Frequency: 47~63 Hz
• Input Current: 6A (RMS) @ 115Vac, 3A (RMS) @ 230Vac
• Inrush Current: No damage
• Output:
• +3.3V @ 24A, +5V @ 24A, +12V1 @ 18A, +12V2 @ 18A, -12V @ 0.5A, +5Vsb @ 2.5A
• +5V and +3.3V total output not exceed 123W
• Maximum combined current for the +12V outputs shall be 36A
• +12V2 Peak current is 19A (less than 10mSec.), minimum voltage during peak is >11.0Vdc
• +5VsbPeakcurrentis3.5A(less than 500mSec.), minimum voltage during peakis >4.5Vdc
• Dielectric Withstand: Input to frame ground 1800VAC for 1 second
• Efficiency: 80% minimum, typical up to 82%
• Rise time: Less than 20ms
• Hold-up Time: 17ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
• MTBF: 100,000 hours on maximum load at +25°C
• Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150 x 140 x 86 mm
• RoHS Compliant

* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.