Sparkle FSP300-60GNV 300W SFX12V Switching Power Supply

Specifications
• Mfr Part Number: FSP300-60GNV
• Features:
• Complied with SFX and SFX12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Remote ON/OFF function
• Internal 12V DC fan included
• Noise Killer (thermal fan speed control function)
• Low noise and ripple
• Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE
• Input:
• Input Range: 90 ~ 265V AC (RMS), Full Input Range
• Frequency: 47 ~ 63 Hz
• Input Current: 4A (RMS) @115V AC, 2A (RMS) @230VAC
• Inrush Current: No damage, typical 80A Max at cold start
• Output:
• Total Watts: 300 W
• +3.3V @ 18A; +5V @ 18A; +12V1 @ 8A; +12V2 @ 16A; -12V @ 0.5A; +5VSB @ 2.0A
• +5V and +3.3V total output not exceed 125W
• +12V1 and +12V2 total current not exceed 22A
• Dielectric Withstand: Primary to frame ground 1800V AC for 1 second
• Efficiency: 75% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
• Rise Time: Less than 20ms
• Hold-up Time: 17ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Less than 3.5mA
• MTBF: 100,000 hours on maximum load at +25°C
• Connector: 1x 20+4pin ATX connector; 1x 4Pin ATX12V Connector; 3x Peripheral; 1x Floppy; 2x SATA connector
• Dimension (WxLxH): 5 x 5.1 x 2.5 inch / 125 x 130 x 63.5 mm
• Active PFC & RoHS Comliant

* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.