SPARKLE FSP250-60SPV 250W ATX12V Switching Power Supply

Specifications
• Mfr Part Number: FSP250-60SPV
• Features:
• Complied with Micro ATX and ATX12V standard
• High efficiency and reliability
• Remote On/Off function
• Internal 12V DC fan included
• Noise Killer (Thermal fan speed control function)
• Low noise and ripple
• Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
• Input:
• Input Range: 115 ~230Vac AC ± 10%, Manual selection
• Frequency: 47~63 Hz
• Input Current: 7A (RMS) @ 115Vac, 4A (RMS) @ 230Vac
• Inrush Current: 60A Max for 264Vrms AC Cold start
• Output:
• Total Power: 250 W
• Output Voltage:
• Minimum Load: +3.3V @ 0.3A; +5V @ 1.0A; +12V @ 0.2A; -12V @ 0A; +5Vsb @ 0A
• Maximum Load: +3.3V @ 12.12/20A; +5V @ 27/21.8A; +12V @ 17A; -12V @ 0.8A; +5Vsb @ 2.0A
• +5V and +3.3V total output not exceed 175W
• +3.3V, +5V, and +12V total output cannot exceed 235W
• Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
• Rise time: Less than 20ms
• Hold-up Time: 16ms minimum at 115V/60Hz and 10.0ms minimum at 230/50Hz
• Power Good Signal: Power on delay time 100~500ms, off delay 1ms minimum (TTL and CMOS compatible)
• Dielectric Withstand: Input to frame ground 1800V AC for 1 second
• Leakage Current: Less than 3.5mA at 115V AC/60Hz
• MTBF: 100,000 hours on maximum load at +25°C
• Connectors: 1x 20+4pin main power connector, 4x peripheral, 2x floppy
• Cooling System: 1x 80mm Ball Bearing fan
• Dimensions (WxLxH): 6.0 x 4.0 x 3.4 inch / 150 x 100 x 86 mm

* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.