Sparkle FSP550PLGR-SLI 550W EPS12V & ATX12V Switching Power Supply w/ Active PFC

Specifications

• Mfr Part Number: FSP550PLGR-SLI
• Features:
  • Complied with ATX12V and EPS12V standard
  • Active Power Factor Correction (PFC) meet EN61000-3-2
  • High efficiency and reliability
  • Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
  • Remote On/Off function
  • Internal 12V DC fan included
  • Noise Killer (Thermal fan speed control function)
  • Low noise and ripple
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Complies with FCC part 15 subpart J class B, and CISPR 22 class B
  • Approved by UL60950, CSA C22.2 NO. 60950, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE
• Input:
  • Input Range: 90~265VAC (RMS), Full Range Input
  • Frequency: 47~63Hz
  • Input Current: 10A (RMS) @ 115VAC, 5A (RMS) @ 230VAC
  • Inrush Current: 80A Max for 115Vac, 120A Max for 230Vac Cold Start
• Output:
  • Total Watts: 550W
  • Output Voltage: +3.3V @ 27A, +5V @ 29A, +12V @ 36A, -5V @ 0.3A, -12V @ 0.8A, +5Vsb @ 2.0A
  • +3.3V and +5V total output not exceed 150W
• Connectors: 1x 24 pin Main Connector, 1x 8 pin EPS 12V/ATX 12V CPU Connector, 1x 4 pin EPS 12V/ATX 12V CPU Connector, 2x 6 pin PCI-Express Connectors, 2x SATA Connectors, 5x 4pin Molex Connectors, 1x Floppy Connector
• Dielectric Withstand: Primary frame ground 1800V AC for 1 second
• Efficiency: 63% minimum measured at nominal AC main voltage and frequency with maximum load on all outputs
• Rise Time: Less than 20ms
• Hold-up Time: 17ms minimum at nominal input voltage
• Power Good Signal: Power on delay time 100 ~ 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
• Leakage Current: Less than 3.5mA
• MTBF: 100,000 hours on maximum load at +25°C
• Dimensions (WxLxH): 5.9 x 5.5 x 3.4 inch / 150.0 x 140.0 x 86.0 mm