Power Connector: 1x 24pin ATX Power Connector, 1x 4pin 12V Power Connector
Form Factor: Mini-ITX
* Product descriptions and part numbers are subject to change, and may not reflect manufacturer product changes. Please check the manufacturer's website and use the item's manufacturer part number to find the most up to date product description.
Reviewed by kennytacos from Little Falls, MN on 03/26/16
Worked out of the box with my Intel Core i5 4460 processor. I was very hesitant about buying this motherboard with that cpu but SuperBiiz DOES have the new BIOS version. I like where the connectors are placed on this motherboard; makes for great cable management for a clean mini-ITX build (I used a Corsair 250D) See photos of my completed build on pcpartpicker here: http://pcpartpicker.com/b/fgvV3C
ALMOST HAD A SATA CONNECTOR BREAK OFF! It's extremely loose and was bent way back at a 45 degree angle when I was just about finished with my build. If that connector had broken off, I would have been screwed because there's only 2 sata connectors, and I have two storage devices (240GB SSD and a 1TB HDD). For how much money this board saved me I'm not too mad about it, I'm just relieved it works. Hoping and praying it doesn't fail in the future...
Make sure your sata cables aren't putting any sort of stress on the connectors because they ARE cheap and flimsy. If by chance you're building in a Corsair 250D with a Corsair H100i GTX liquid cpu cooler, the tubes will not fit around the rear I/O. HOWEVER you can mount it with the tubes towards the front if you're willing to A: not have an intake fan, or B: mount the radiator in an unconventional position with only a couple screws to gain the clearance to keep the 140mm intake (which I did and (continued...)
Reviewed by Susan Miller from Danbury, WI on 09/21/14
easy setup up and running rock solid. I am using this for HTPC
CASE: iStar S-0112-DT
MEM: 4G (2X2G) Gskill 1600
SSD: Corsair 60G